Dr. Öğr. Üyesi EBUBEKİR KOÇ

Yayın Ağı

Makaleler 41

1. Hollow Glass Sphere Modification Effect on Mechanical Properties of Powder Bed Fusion Processed Polyamide 12 Parts

Coşkun M. C., Alparslan A., Cingöz U. C., Coşkun M., ÖZBAY KISASÖZ B., KOÇ E., et al.

Journal of Applied Polymer Science , cilt.143, sa.2, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

2. Effects of Retrogression and Re-aging Heat Treatments on Microstructure, Phase Transformations, Hardness, and Dry Sliding Wear in Powder Bed Laser Fusion/AlSi10Mg

KOÇ E., Tütük İ., Cingöz U. C., Özer G.

Journal of Materials Engineering and Performance , cilt.35, sa.3, ss.3055-3066, 2026 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

3. The Role of RRA heat treatments on corrosion behaviour of AlSi10Mg produced by additive manufacturing

Özer G., Tütük İ., Cingöz U. C., KOÇ E., Karaaslan A.

Materials Letters , cilt.393, 2025 (SCI-Expanded, Scopus)

4. Large-Scale Interlaboratory Study Along the Entire Process Chain of Laser Powder Bed Fusion: Bridging Variability, Standards, and Optimization across Metals and Polymers

Kuşoğlu I. M., Garg S., Abel A., Balachandran P. V., Barcikowski S., Becker L., et al.

Advanced Engineering Materials , cilt.27, sa.14, 2025 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

5. Energy density optimization in laser-based powder bed fusion of nano-modified PA12 powder feedstocks

Grünewald M., Ziefuss A. R., Schlör C., Popp K., Gann S., Kusoglu I. M., et al.

Journal of Materials Science , cilt.60, sa.28, ss.12056-12071, 2025 (SCI-Expanded, Scopus)

6. Investigation of wear behavior of PA 12 matrix ceramic reinforced composites produced by selective laser sintering method Seçici lazer sinterleme yöntemiyle üretilen PA 12 matrisli seramik takviyeli kompozitlerin aşınma davranışının incelenmesi

ÖZBAY KISASÖZ B., Tütük İ., KOÇ E., Karabeyoğlu S. S., KISASÖZ A.

Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.39, sa.2, ss.1029-1035, 2024 (SCI-Expanded, Scopus, TRDizin)

7. Efficiency Research of Conformal Channel Geometries Produced by Additive Manufacturing in Plastic Injection Mold Cores (Inserts) Used in Automotive Industry

Çallşkan C. I., Özer G., KOÇ E., Sarltaş U. S., Ylldlz C. F., Çiçek Ö. Y.

3D Printing and Additive Manufacturing , cilt.10, sa.2, ss.213-225, 2023 (SCI-Expanded, Scopus)

8. Dry sliding wear behavior of energy density dependent PA 12/Cu composites produced by selective laser sintering

ÖZBAY KISASÖZ B., KOÇ E., KISASÖZ A., Karabeyoǧlu S. S.

Materialpruefung/Materials Testing , cilt.65, sa.2, ss.303-312, 2023 (SCI-Expanded, Scopus)

9. A Novel 3D Printed Air-Cooled Fuel Cooler Heat Exchanger for Aviation Industry

Koca A., Çalışkan C. İ., KOÇ E., Akbal Ö.

Heat Transfer Engineering , cilt.44, sa.15, ss.1350-1371, 2023 (SCI-Expanded, Scopus)

10. Estimation of surface roughness in selective laser sintering using computational models

KOÇ E., ZEYBEK S., ÖZBAY KISASÖZ B., Çalışkan C. İ., Bulduk M. E.

International Journal of Advanced Manufacturing Technology , cilt.123, sa.9-10, ss.3033-3045, 2022 (SCI-Expanded, Scopus)

11. Evolution of temperature and residual stress behavior in selective laser melting of 316L stainless steel across a cooling channel

Khan H. M., Waqar S., KOÇ E.

Rapid Prototyping Journal , cilt.28, sa.7, ss.1272-1283, 2022 (SCI-Expanded, Scopus)

12. Corrosion of Additively Manufactured Metallic Components: A Review

Khan H. M., Özer G., YILMAZ M. S., KOÇ E.

Arabian Journal for Science and Engineering , cilt.47, sa.5, ss.5465-5490, 2022 (SCI-Expanded, Scopus)

13. Comparison of the effect of different topological designs and process parameters on mechanical strength in gears

Bulduk M. E., Çalışkan C. İ., Coşkun M., Özer G., KOÇ E.

International Journal of Advanced Manufacturing Technology , cilt.119, sa.9-10, ss.6707-6716, 2022 (SCI-Expanded, Scopus)

14. Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering

Çalışkan C. İ., Coşkun M., Özer G., KOÇ E., Vurkır T. A., Yöndem G.

International Journal of Advanced Manufacturing Technology , cilt.117, sa.11-12, ss.3805-3817, 2021 (SCI-Expanded, Scopus)

15. Effect of aging and finish machining on the surface integrity of selective laser melted maraging steel

TAŞCIOĞLU E., Khan H. M., KAYNAK Y., Coşkun M., Tarakci G., KOÇ E.

Rapid Prototyping Journal , cilt.27, sa.10, ss.1900-1909, 2021 (SCI-Expanded, Scopus)

16. An improved bees algorithm for training deep recurrent networks for sentiment classification

ZEYBEK S., Pham D. T., KOÇ E., SEÇER A.

Symmetry , cilt.13, sa.8, 2021 (SCI-Expanded, Scopus)

17. Weibull distribution of selective laser melted AlSi10Mg parts for compression testing

KHAN H. M., DİRİKOLU M. H., KOÇ E.

journal of advances in manufacturing engineering (Online) , cilt.2, sa.1, ss.14-19, 2021 (TRDizin)

18. Estimation of the compression strength and surface roughness of the as-built SLS components using weibull distribution

KHAN H. M., Tarakçı G., Bulduk M. E., KOÇ E.

Journal of Advances in Manufacturing Engineering , cilt.2, sa.1, ss.1-6, 2021 (TRDizin)

19. Investigation of direct metal laser sintering downskin parameters’ sagging effect on microchannels

Çalışkan C. İ., Özer G., Coşkun M., KOÇ E.

International Journal of Advanced Manufacturing Technology , cilt.114, sa.9-10, ss.2567-2575, 2021 (SCI-Expanded, Scopus)

20. Improving the surface quality and mechanical properties of selective laser sintered PA2200 components by the vibratory surface finishing process

Khan H. M., ŞİRİN T., Tarakci G., Bulduk M. E., Coskun M., KOÇ E., et al.

SN Applied Sciences , cilt.3, sa.3, 2021 (ESCI, Scopus)

21. MS-TR: A Morphologically enriched sentiment Treebank and recursive deep models for compositional semantics in Turkish

ZEYBEK S., KOÇ E., SEÇER A.

Cogent Engineering , cilt.8, sa.1, 2021 (ESCI, Scopus)

22. The impact of aging and drag-finishing on the surface integrity and corrosion behavior of the selective laser melted maraging steel samples Einfluss von Alterung und Schleppschleifen auf die Oberflächenintegrität und das Korrosionsverhalten von mit dem selektiven Laserstrahl geschmolzenen Proben aus martensitaushärtbarem Stahl

Khan H., Özer G., Tarakci G., Coskun M., KOÇ E., KAYNAK Y.

Materialwissenschaft und Werkstofftechnik , cilt.52, sa.1, ss.60-73, 2021 (SCI-Expanded, Scopus)

23. Effect of HIP process and subsequent heat treatment on microstructure and mechanical properties of direct metal laser sintered AlSi10Mg alloy

Ertuğrul O., Öter Z. Ç., YILMAZ M. S., Şahin E., Coşkun M., Tarakçı G., et al.

Rapid Prototyping Journal , cilt.26, sa.8, ss.1421-1434, 2020 (SCI-Expanded, Scopus)

24. Unmanned Aerial Vehicle Production With Additive Manufacturing

KOÇ E., Çalışkan C. İ., Coşkun M., Khan H.

Journal of aviation (Online) , cilt.4, sa.1, ss.22-30, 2020 (TRDizin)

25. Investigation of the surface quality and dimensional accuracy of polymer patterns produced by selective laser sintering (SLS) method for investment casting (IC)

Özer G., ÖZBAY KISASÖZ B., Öter Z. Ç., Tarakçi G., YILMAZ M. S., Bulduk M. E., et al.

International Journal of Cast Metals Research , cilt.33, sa.2-3, ss.146-152, 2020 (SCI-Expanded, Scopus)

26. Investigation of the effects of different heat treatment parameters on the corrosion and mechanical properties of the AlSi10Mg alloy produced with direct metal laser sintering

Özer G., Tarakçi G., YILMAZ M. S., Öter Z. Ç., Sürmen Ö., Akça Y., et al.

Materials and Corrosion , cilt.71, sa.3, ss.365-373, 2020 (SCI-Expanded, Scopus)

27. Kuşevleri ve 3 Boyutlu Baskı Yöntemi ile Üretimi

ÇALIŞKAN C. İ., KOÇ E.

FSM İlmi Araştırmalar İnsan ve Toplum Bilimler Dergisi , cilt.0, sa.13, ss.167-185, 2019 (TRDizin)

28. Thermo-mechanical simulations of selective laser melting for AlSi10Mg alloy to predict the part-scale deformations

Söylemez E., KOÇ E., Coşkun M.

Progress in Additive Manufacturing , cilt.4, sa.4, ss.465-478, 2019 (Scopus)

29. Support optimization for overhanging parts in direct metal laser sintering

Oter Z. C., Coskun M., Akca Y., Surmen O., YILMAZ M. S., Ozer G., et al.

Optik , cilt.181, ss.575-581, 2019 (SCI-Expanded, Scopus)

30. Benefits of laser beam based additive manufacturing in die production

Oter Z. C., Coskun M., Akca Y., Sürmen Ö., YILMAZ M. S., Özer G., et al.

Optik , cilt.176, ss.175-184, 2019 (SCI-Expanded, Scopus)

31. Double stud cargo fitting research, alternative cargo clip design and analysis

Çalikan C. Ý., KOÇ E., Khan H. M., Bulduk M. E.

International Journal of Aviation, Aeronautics, and Aerospace , cilt.6, sa.5, 2019 (Scopus)

32. Parameters optimization for horizontally built circular profiles: Numerical and experimental investigation

Khan H., DİRİKOLU M. H., KOÇ E.

Optik , cilt.174, ss.521-529, 2018 (SCI-Expanded, Scopus)

33. Numerical investigation of heat current study across different platforms in SLM processed multi-layer AlSi10Mg

Khan H., Dirikolu M., KOÇ E., Oter Z.

Optik , cilt.170, ss.82-89, 2018 (SCI-Expanded, Scopus)

34. Scratches Detection in Extruded Aluminium Profiles Using Image Processing

KOÇ E., Al Jabbouli H.

International Journal of Engineering Science and Technology , cilt.7, sa.6, ss.221-225, 2018 (Hakemli Dergi)

35. Yapay Sinir Ağları, Kelime Vektörleri ve Derin Öğrenme Uygulamaları

KOÇ E., KUŞ Z., Çalışkan S., Yazıcıoğlu S., Demirci U.

FSM Vakıf Üniversitesi Açıkerişim , 2018 (Hakemsiz Dergi)

36. Evrimsel Algoritmalar ve Uygulamaları

KOÇ E., KUŞ Z., Çalışkan S., Demirci U.

FSM Vakıf Üniversitesi Açıkerişim , 2017 (Hakemsiz Dergi)

37. Selective Laser Sintering of Aluminum Extrusion Dies

KOÇ E., Akça Y., Öter Z., Coşkun M.

FSM Vakıf Üniversitesi Açıkerişim , ss.1-18, 2016 (Hakemsiz Dergi)

38. Classification of main faults in the production process of extruded aluminium profiles

Al-jabbouli H., KOÇ E., Akça Y.

International Journal of Engineering and Technology , cilt.7, sa.1, ss.84-90, 2015 (Scopus)

39. Design of a Two-dimensional Recursive Filter Using the Bees Algorithm

Pham D., KOÇ E.

International Journal of Automation and Computing , cilt.7, sa.3, ss.399-402, 2010 (Scopus)

40. Optimal design of mechanical components using the bees algorithm

Pham D., Ghanbarzadeh A., Otri S., KOÇ E.

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , cilt.223, sa.5, ss.1051-1056, 2009 (SCI-Expanded, Scopus)

41. The Bees Algortihm: Technical Note

Pham D., Ghanbarzadeh A., KOÇ E., Otri S., Rahim S., Zaidi M.

Manufacturing Engineering Centre, Cardiff University, UK , cilt.1, ss.1-57, 2005 (Hakemsiz Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 28

1. A METAHEURISTIC APPROACH FOR MODELLING OUT-OF-VOCABULARY WORDS FOR TURKISH SENTIMENT ANALYSIS

ZEYBEK S., KOÇ E., SEÇER A.

III. International Informatics Congress 2024, Batman, Türkiye, 02 Mayıs 2024 - 04 Ocak 2025, ss.175-185, (Tam Metin Bildiri)

2. A PRELIMINARY STUDY ON CORROSION AND WEAR BEHAVIOURS OF ARTIFICIALLY AGED ALSI10MG PRODUCED BY ADDITIVE MANUFACTURING

ÖZBAY KISASÖZ B., Tütük İ., KOÇ E., KISASÖZ A.

Additive Manufacturing Conference Turkey 2024 (AMC'24), Antalya, Türkiye, 25 - 27 Nisan 2024, (Özet Bildiri)

3. Influence of Dry Sliding Test Temperature on Wear Properties of The PA 12 Composites

ÖZBAY KISASÖZ B., Tütük İ., KOÇ E., KARABEYOĞLU S. S., KISASÖZ A.

9TH INTERNATIONAL CONFERENCE ON ENGINEERING AND NATURAL SCIENCES, Sarajova, Bosna-Hersek, 17 - 19 Mayıs 2023, (Özet Bildiri)

4. ARTIFICIAL ALZHEIMER'S EEG DATASET GENERATION USING GENERATIVE ADVERSARIAL NETWORKS

Al-Hammadi H., Nasser M., KOÇ E.

International Conference on Bioinformatics, Biomedicine, Biotechnology and Computational Biology (EUIC3BCB), Türkiye, 13 Mayıs 2023, (Tam Metin Bildiri)

5. MULTI-TRACK, MULTI-LAYER FINITE ELEMENT ANALYSIS OF THE TEMPERATURE FIELD DURING SELECTIVE LAYER MELTING OF 316L STAINLESS STEEL

Waqar S., KHAN H. M., Akram S., KOÇ E.

AMCTURKEY Additive Manufacturing Conference, Kuşadası, Türkiye, 6 - 08 Ekim 2022, (Tam Metin Bildiri)

6. INFLUENCE OF CERAMIC-BASED ADDITIVES ON THE DRY SLIDING WEAR BEHAVIOUR OF PA 12 PRODUCED BY SLS

ÖZBAY KISASÖZ B., Tütük İ., KARABEYOĞLU S. S., KOÇ E., KISASÖZ A.

AMCTURKEY Additive Manufacturing Conference, Kuşadası, Türkiye, 6 - 08 Ekim 2022, (Tam Metin Bildiri)

7. Effect of building platform position on the surface quality, dimensional accuracy, and geometrical precision of direct metal laser sintering (DMLS) parts

Oter Z. C., Coskun M., KOÇ E.

European Powder Metallurgy Congress and Exhibition, Euro PM 2018, Bilbao, İspanya, 14 - 18 Ekim 2018, (Tam Metin Bildiri)

8. The Effects of Hatch distance on the Thermal and Mechanical Properties of AlSi10Mg Parts in Direct Metal Laser Sintering (DMLS) Method

YILMAZ M. S., ÖZER G., ÖTER Z. Ç., TARAKÇI G., COŞKUN M., KOÇ E., et al.

IV. International Scientific and Vocational Congress-Engineering, Ankara, Türkiye, 7 - 10 Kasım 2019, (Tam Metin Bildiri)

9. Production of Primecast Polystyrene by Selective Laser Sintering (SLS) Method and Development of Surface Roughness of Sintered Parts

Burçin Ö., ÖZER G., Mustafa Enes B., TARAKÇI G., ÖTER Z. Ç., KOÇ E.

Additive Manufacturing Conference (AMCTURKEY), İstanbul, Türkiye, 17 - 18 Kasım 2019, (Tam Metin Bildiri)

10. INFLUENCE OF HOT ISOSTATIC PRESSING AND SUBSEQUENT HEAT TREATMENT ON MECHANICAL PROPERTIES OF DIRECT METAL LASER SINTERED ALSI10MG ALLOY

ERTUĞRUL O., Öter Z., YILMAZ M. S., Şahin E., Coşkun M., Tarakçı G., et al.

Additive Manufacturing Conference Turkey, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Özet Bildiri)

11. Ekstrüzyon Preslerinde Enerji Yönetimi

Akça Y., ÖZER G., YILMAZ M. S., KOÇ E.

9th International Aluminium Semposium (ALUS’xx09), İstanbul, Türkiye, 10 - 11 Ekim 2019, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

12. Selective Laser Melting Process Simulation of AlSi10Mg Alloy to Predict Part Distortions

SÖYLEMEZ E., KOÇ E., Coşkun M.

18th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION, Eskişehir, Türkiye, 3 - 06 Temmuz 2018, (Özet Bildiri)

13. Classification of EEG Signals for Detection of Epileptic Seizures by Using PyEEG Module and The Bees Algorithm

ZEYBEK S., SEÇER A., KOÇ E.

7th International Conference on Applied Analysis and Mathematical Modeling ICAAMM18, İstanbul, Türkiye, 20 - 24 Haziran 2018, cilt.1, ss.83, (Özet Bildiri)

14. Investigation of Elemental Distribution in the Sheet Sections After Aluminum Continuous Sheet Casting, Cold Rolling and Heat Treatment Processes

Ulus A., İpek S. K., Ekici H., Öter Z. Ç., KOÇ E.

International symposium on Light Metals, 2018, Arizona, Amerika Birleşik Devletleri, 11 - 15 Mart 2018, cilt.Part F4, ss.959-969, (Tam Metin Bildiri)

15. ANISOTROPIC MECHANICAL BEHAVIOUR OF DIRECT METAL LASER SINTERING (DMLS) PARTS

KOÇ E., Coşkun M., Öter Z.

3rd International Porous and Powder Materials Symposium, İstanbul, Türkiye, 1 - 02 Eylül 2017, (Tam Metin Bildiri)

16. Tek Katlı Tek Açıklıklı Düzlem Çerçevenin Hibrit Dinamik Benzeri Testi

AKSOYLAR C., DOĞRAMACI AKSOYLAR N., Güzel Ö., KOÇ E.

19. ULUSAL MEKANİK KONGRESİ, Trabzon, Türkiye, 24 - 28 Ağustos 2015, cilt.1, ss.77-84, (Tam Metin Bildiri)

17. The vantage point bees algorithm

ZEYBEK S., KOÇ E.

7th International Joint Conference on Computational Intelligence, IJCCI 2015, Lisbon, Portekiz, 12 - 14 Kasım 2015, cilt.1, ss.340-345, (Tam Metin Bildiri)

18. Hierarchical PID Controller Design for a Flexible Link Robot ManipulatorUsing the Bees Algorithm

Pham D., KOÇ E., KALYONCU M., TINKIR M.

Proceedings of 6th International Symposium onIntelligent Manufacturing Systems, Sakarya, Türkiye, 14 - 16 Ekim 2008, ss.757-765, (Tam Metin Bildiri)

19. Application of the bees algorithm to the training of radial basis function networks for control chart pattern recognition

Pham D., Ghanbarzadeh A., KOÇ E., Otri S.

5th CIRP international seminar on intelligent computation in manufacturing engineering, Ischia, İtalya, 25 Temmuz 2006 - 27 Temmuz 2007, ss.711-716, (Tam Metin Bildiri)

20. Using the bees algorithm to optimise a support vector machine for wood defect classification

Pham D., Packianather M., Mahmuddin M., Ghanbarzadeh A., KOÇ E., Otri S.

Innovative Production Machines and Systems Virtual Conference 2007, Cardiff, İngiltere, 24 - 26 Temmuz 2007, (Tam Metin Bildiri)

21. Manufacturing cell formation using the Bees Algorithm

Pham D., Afify A. s., KOÇ E.

hird International Virtual Conference on Intelligent production machines and systems (IPROMS 2007), Cardiff, İngiltere, 2 - 04 Temmuz 2007, (Tam Metin Bildiri)

22. OPTIMIZATION OF THE WEIGHTS OF MULTI-LAYERED PERCEPTIONS USING THE BEES ALGORITHM

Pham D., KOÇ E., Ghanbarzadeh A.

INTERNATIONAL SYMPOSIUM ON INTELLIGENT MANUFACTURING SYSTEMS, Cardiff, İngiltere, 11 - 13 Haziran 2006, ss.38-46, (Tam Metin Bildiri)

23. Using the Bees Algorithm to Train Neural Networks for Wood Defect Identification

Pham D., Soroka A. J., Packianather M., Ghanbarzadeh A., KOÇ E., Otri S.

40th CIRP International Seminar on Manufacturing Systems, Liverpool, 30 Mayıs - 02 Haziran 2007, (Tam Metin Bildiri)

24. Some applications of the bees algorithm in engineering design and manufacture

Pham D., Soroka A. J., KOÇ E., Ghanbarzadeh A., Otri S.

International Conference on Manufacturing Automation, 28 - 30 Mayıs 2007, ss.782-794, (Tam Metin Bildiri)

25. Using the bees algorithm to schedule jobs for a machine

Pham D., KOÇ E., Lee J., Phrueksanant J.

8th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM and Robotic Performance, LAMDAMAP 2007, Cranfield, İngiltere, 25 - 28 Haziran 2007, ss.430-439, (Tam Metin Bildiri)